Netgear EX7300 setup

Netgear EX3700 Setup| Netgear AC750 Setup

Get your devices connected with the Netgear EX3700 AC750 extender to enjoy the seamless Internet connection. The Netgear EX3700 setup extender extends your current network speed, giving dual-band WiFi. Even use the extender in AP mode as a WiFi access point and make a new WiFi hotspot using an Ethernet connection. Here in this post, we cover the Netgear EX3700 AC750 Extender Setup. Let’s start without any further delay.

Netgear EX3700 setup using WPS method

In this method, you have to connect with a secure wifi network without using the network name and password. Let’s see how!

  • Start with powering up the Netgear EX3700 wifi extender.
  • Put your AC750 extender near the Netgear router.
  • Now, plug the extender into the power socket.
  • After that, wait for the LED light on Netgear EX3700 to turn green.
  • Once the light shows green, push the WPS button on the Netgear extender.
  • In case, the Netgear EX3700 LED shows white, it means the connection is good between router and extender.
Netgear EX3700 Setup
  • If the LED light on the extender shows blue, it means the connection is good enough.
  • But if the LED on the AC750 extender shows red light, keep the extender closer to the router and try again to make a connection between them.
    Note: Your Netgear router directly connects with the 5 GHz band, if your router supports the 5 GHz band. In case, your Netgear EX3700 extender fails to connect to your router’s 5 GHz band, contact our expert team.
  • Put the AC750 extender in a new place.
  • That’s it connects your computer or smartphone device to the extender network.

Netgear AC750 Setup through manual method

Proceed with the following steps for extender setup through the manual method.

  • Foremost, turn the Netgear AC750 range extender ON.
  • Keep the extender near the wifi router.
  • Connect the extender to a power socket.
  • Then, connect the Netgear router to the AC750 extender.
  • Open any desired web browser on your computer device and type www.mywifiext.net.
  • Here, a Netgear installation assistant will appear on your screen.
  • Go with the prompts to connect the AC750 extender to the current wifi network.
  • Now, you can move the extender to a new place.
  • If the connection gets poor, keep the extender and router close till the LED light turns white.

Netgear EX3700 Setup via Nighthawk app

Use the Nighthawk app to set up the Netgear EX3700 range extender with simple steps. Nighthawk app runs on both the platform, such as Android system and iOS systems. Go along with these steps to set up the extender using the Nighthawk app.

  • First, check that your Netgear router has active internet.
  • Power up your Netgear AC750 range extender.
  • Download the Nighthawk app on your device.
  • Once done, install the Nighthawk app on your device.
  • Go with the on-screen instructions to set up your Netgear range extender.

Netgear EX3700 Range Extender Common Issues

  • Can’t access to mywifiext.local
  • mywifiext.net not working
  • Netgear EX3700 extender failed to update.
  • Error while accessing 192.168.1.250 IP address
  • WiFi EX3700 extender is connected but no internet
  • Fail to find Netgear range extender network name
  • Fail to update Netgear firmware
  • MAC address filtering issue
  • AC750 extender drops internet connectivity
  • Internet connected but fail to work
  • Forgot default password of the Netgear extender
  • LED lights on Extender is not stable
  • Can’t perform Netgear EX3700 reset
  • Netgear Extender AC750 red light causing error
  • Netgear genie app fail to open

Troubleshooting steps to fix the Netgear EX3700 Extender

Go with the following mentioned troubleshooting steps to fix the Netgear EX3700 extender setup issues:

  • Assure that the Netgear EX3700 extender receives enough power supply from the power socket.
  • Be sure the wall plug is not damaged.
  • Make sure your device gets a high-speed internet connection.
  • Re-check all the wired connections. Make sure they should not be damaged.
  • Keep away your Netgear EX3700 extender from microwave ovens, cordless phones, metal objects, aluminum studs, etc.
  • Confirm that you are using the correct mywifiext.net web address. Cross-check the web address after entering.
  • Power cycle the EX3700 extender and try to set it up again.
  • Always use the updated version of the web browser during Netgear EX3700 setup.
  • Also, use the latest version of the Netgear Firmware on the extender.
  • Last, reset the wifi AC750 extender to its factory default settings.

If none of the above troubleshooting steps fail to solve your issues, don’t worry! Contact our experts to resolve your Netgear EX3700 manual setup issues.

Netgear EX3700 Range Extender Firmware Update

When your Netgear AC750 extender does not provide high speed after a successful setup process, it means you need to do the firmware update on the Netgear extender. A firmware update is necessary to fix all the issues and improve the speed of the extender.

To firmware update, download the latest version of the firmware. Let’s see the updating process of the extender’s firmware.

  • Start with powering up the EX3700 wifi extender.
  • Connect the Netgear router to the EX3700 extender.
  • After, go to the web browser according to your device.
  • Type mywifiext.net in the URL bar and hit the Enter key.
  • Log in to your EX3700 extender by entering the Username and Password.
  • Proceed to the settings menu and hit the Firmware Update button.
  • Furthermore, tap on the Check button.
  • Tap on the Yes button, if there is any firmware update available.
  • That’s it, wait for a few minutes and leave the Netgear EX3700 extender firmware to update properly.
Netgear EX3700 Extender Firmware update
Netgear Nighthawk